The Boost stick is a simple electronic device that plugs inline between your boost sensor and the OE harness. It alters the output signal of the boost sensor using a fixed map developed on our Superflow Chassis dyno. Altering the signal results in the ECM commanding increased boost levels. We have set the boost map up properly (approx 30 psi max) which does not risk engine/turbo damage so long as other boost increasing devices or boost adding tuners are not used simultaneously. The result is increased performance, improved pedal response, and significantly decreased smoke and exhaust temps. Best results will be noticed when used in conjunction with the increased fueling of a chip or tuner.

I strongly recommend the extension so that you can remove Boost stick for service. -JK

Please view the Installation Instructions here as we do not include in the package.

When ordering this item individually, shipping generally runs $7.60 via USPS Priority Mail for US orders. Please be sure to provide a mailing address or if US Mail does not deliver to shipping address note this and we will ship UPS.

"I strongly advise ordering the Boost Stick With Extension to facilitate easy removal without the need to access the connection at the sensor." -JK

The Boost Stick is a simple plug in device that alters the signal output from the OE boost sensor based on a fixed custom map. In doing so, we will see a significant increase in boost which will result in more power, lower exhaust temperatures, and potential gains in fuel mileage.

Please view the Installation Instructions here.

When ordering this item individually, shipping generally runs $7.10 via USPS Priority Mail for US orders. Please be sure to provide a mailing address or if US Mail does not deliver to shipping address note this and we will ship UPS.