All Products

This plug is exclusive to the Kennedy Headlight Booster Kit and will not work on it's own.

Replacement ECM module for 2011-2014 LML Only. These are new/new old stock units. Some scuffing, but overall new condition. These units are blank and require programming. Programming can be done via Kennedy Custom Autocal or factory stock can be done prior to shipping for an additional fee. Some on vehicle setup required ie: injector flow rate programming etc.

This is the short (7" approx) filter that is commonly used on the Pump/filter combo and Universal Mega kits. These Baldwin elements replace the white generic filters.

Must specify LH/RH at time of order. Stock is limited. This listing is for non heated glass only.

Set of 8 genuine GM/Bosch reman injectors. Requires $1200 core deposit ($150/injector) refundable when cores are received

This is a Lucerix/Cipa RH power/heated mirror #70610 for the GMT800 body series 2001-2007. Closeout item-all sales final.

This is the electrical motor and impeller replacement part.

Replace the bolts with worn out hex fittings.

Kit contains four plastic fittings (one end and 3 tees) with orings, clips, and hose. Covers one bank of the 04.5-10 Dmax engine, two required for full job.

Includes 8 Injector banjo seals and 2 return line end banjo seals.

Fits ONLY 97 up 6.5 and ALL with dual thermostat configuration upgrade. Listing is for 1 thermostat. 2 required per application. All 330 series stats now include the rubber oring.There is no additional gasket used.

"Thermostat temperature selection is more a matter of personal preference. I personally prefer the 190° stats, but the majority use the 180° stat." - JK

This is a high output 10mm stroker CP3 which is typically used in race applications.

Converts the failure prone CP4 to a highly DCR pump. Fits 2011-2025 model year pickup trucks.

Gen2.1 2011+ 6.7L Power Stroke CP4 Bypass Kit with Return Filter Assembly

This is a standard displacement CP3 that is modified for improved flow at speeds in excess of 3500 RPM. All are LBZ based pumps/regulators so to use in a LLY or LB7 would require custom programming of the pump flow curve.