All Products
Bilstein Shocks Silverado/Sierra 2500HD 2001-2010 HD yellow set of 4
These are the HD yellow units which in my experience provide the best handling, ride and control for both empty and loaded on road driving. Fits 2001-2010 Silverado and Sierra 2500HD 2wd and 4x4 trucks at std ride height OR with increased ride height from torsion bar adjustment or torsion bar key replacement provided the spacers noted below are added.
"I highly recommend the spacers for all installations as they cannot have a negative effect and tend to reduce stress on the lower bushings at full extension. For all applications, especially if you have raised the front end make a note in shipping instructions and for $5 we will include a pair of shaft spacers." -JK
Sub-Category: Shocks
Sub-Category: Bilstein
Sub-Category: Chev-GMC
Bilstein Shocks Silverado/Sierra 2500HD 2001-2010 HD yellow set of 4
Bilstein steering stabilizer for GM 2500-3500HD 01-10
This item is backordered. Please check back later
Sub-Category: Steering
Sub-Category: Stabilizers
Sub-Category: Chev-GMC
Bilstein steering stabilizer for GM 2500-3500HD 11-19
Sub-Category: Steering
Sub-Category: Stabilizers
Sub-Category: Chev-GMC
Blocker Package for Duramax LLY 04.5-05 only
This product cannot be shipped to California
Includes "Fingers Stick" emulator and Blocker plate for 04.5-05 LLY Dmax engines only. If you are not sure which engine you have, please back ask. This kit is designed to combat EGR system related trouble codes and limp modes caused by exhaust system or boost modifications.
"This item is sold "as is" no warranty/no returns and is offered for purchase only through the online store. It is considered a "self service" item with no phone or other tech support provided. Please view the Blocker Package FAQ page as well as Instructions PRIOR to ordering to make sure it will work with your application. We do not include any print instructions with your shipment. All of the information that you need should be linked below." -JK
Sub-Category: EGR
Sub-Category: EGR Blocker
Sub-Category: 2004.5-2005 LLY
Blocker Pkg for Dmax LBZ 2006-2007
This product cannot be shipped to California
Includes "Fingers Stick" emulator and Blocker plate for 06 and 07LBZ and LLY Dmax engines only. If you are not sure which engine you have, please back up one page and read my notes. This kit is designed to combat Mass Air Flow and EGR system related trouble codes and limp modes caused by exhaust system or air flow modifications."This item is sold "as is" no warranty/no returns and is offered for purchase only through the online store. It is considered a "self service" item with no phone or other tech support provided. Please view the Instructions online as we do not include with your shipment. All of the information that you need should be linked below."-JK
Sub-Category: EGR
Sub-Category: EGR Blocker
Sub-Category: 2006-2007 LBZ
Blocker plate only for Dmax LBZ 2006-2007
This product cannot be shipped to California
This is the blocker plate only.
"This item is sold "as is" no warranty and is offered for purchase only through the online store. It is considered a "self service" item with no phone or other tech support provided. Please view the Instructions online as we do not include with your shipment. All of the information that you need should be linked below." -JK
Sub-Category: EGR
Sub-Category: EGR Blocker
Sub-Category: 2006-2007 LBZ
Blocker plate only for Duramax LMM
This product cannot be shipped to California
This is the plate only. It will not take care of codes associated with EGR flow. To take care of codes, I'd recommend my
Sub-Category: EGR
Sub-Category: EGR Blocker
Sub-Category: 2007.5-2010 LMM
Boost Valve for Dmax LB7
The KD Boost Valve is a simple device that installs in the wastegate hose simply and easily. It eliminates boost pressure from the wastegate actuator until a preset level is reached, at which point it begins to deliver a lesser psi. By doing this, the turbo uses more of the exhaust to drive the compressor rather than allowing peak drive psi to escape. The result is much quicker turbo spool up and a potential increase in peak boost pressure. The device comes preset to a safe level near stock depending on programming and engine breathing capabilities. Simply cut the wastegate hose and insert the valve with the bleed hole on the wastegate end. To increase boost you will shorten the overall length and to decrease you will lengthen it. To come back to start point, adjust so that the overall unit is approximately 3" long.
Simpler than installing an aftermarket wastegate canister, and much easier to adjust. With proper adjustment, it can be used in conjunction with aftermarket wastegates as well.
Sub-Category: Boost Control
Sub-Category: Duramax LB7
Caltracs Traction bars for 2500/3500HD
Fits Silverado/Sierra 2500HD and 3500. Other applications available. If there are any mods to the rear springs/suspension they must be noted.
Product Review and Installation Instructions
Other applications available by request.
Sub-Category: Traction Bars
Cast Flow manifolds and up pipes-bare
Special Order Item
Profab manifolds and up pipes fit 2001+ Duramax engines. This is the bare, uncoated set.
This is a special order item that ships direct from the mfr and is not kept in stock.
Sub-Category: Exhaust
Sub-Category: Manifolds Up Pipes
Cast Flow manifolds and up pipes-coated
Profab manifolds and up pipes fit 2001+ Duramax engines. This is the black ceramic coated set.
This is a special order item that ships direct from the mfr and is not kept in stock.
Sub-Category: Exhaust
Sub-Category: Manifolds Up Pipes
Connecting oring for Kennedy Lift Pump
This is the connecting oring that is used to join two Kennedy lift pumps or a Universal Mega filter head directly together via thru-bolts without fittings. It is fuel resistant Viton material #119
Sub-Category: KD Mega Filter
Sub-Category: Universal Mega
Showing 25–36 of 373 results