All Products

"Please be certain that you have read and understand the and print the Installation Overview prior to ordering this product. We have a SIMPLE bleed orifice modification available if needed to allow any naturally occurring "air" to pass as it does in any normal system We have had zero air related issues with this bleed installed." - JK

"It has been proven by numerous revisions of the OEM filter that fuel quality and filtration levels are not up to the task of protecting your fuel system. Running this dirty fuel through our Duramax engines has caused many premature injection system failures. Secondary fuel filtration ensures that we will give these components the best chance for a long, and healthy life!" - JK

"Always carry a spare filter for both the factory, and the auxilliary unit at all times, and use a quality emulsifying conditioner like FPPF Total Power at every fill-up. Check out the Filtermag as a great addition to your improved filtration!" - JK

This is the long spin on replacement element with the drain valve for the Duramax MEGA Fuel Filter kit. Elements are typically good for 30k plus miles as a secondary element.

"Our filter restriction test gauge is a very handy tool to track filter life. I also suggest using a good quality additive like our FPPF Total Power to ensure no free water can stand inside the filter and cause corrosion." -JK

Replace the flimsy OE plastic bleed screw with this hearty metal unit. Made from anodized aluminum to make it easy to locate and highly durable.

"Finger tight is all that these need to be. Try for yourself and you will see that it needs to be loosened significantly before it begins to allow any air or fuel to discharge."- JK

Case lot contains 6ea Total Power and 8+ Cetane Improver.

"I generally blend these two 1:1 and treat at 1.5 to 2x the FPPF recommended treat ratio. I use a 1qt bottle from Sta-Bil with a squeeze up chamber to dispense 3-6oz per fill depending on volume added." - JK

Case lot contains 6ea Total Power and Fuel Power plus Cetane Improver.

"I generally blend these two 1:1 and treat at 1.5 to 2x the FPPF recommended treat ratio. For direct dispensing to vehicle I use a 1qt bottle from Sta-Bil with a squeeze up chamber to dispense 3-6oz per fill depending on volume added. Essentially 1/4oz to 1/2oz per gallon." - JK

This is the control box only for the Kennedy Lift Pump harness kit.

This is the same stainless steel bracket shown in the Kennedy Lift Pump Installation Instructions. It fits Extended and Crew Cab trucks, as well as Vans, Kodiaks, and Duraburbs with a little creativity. It is designed to attach with a single bolt. The weight is carried by the horizontal leg of the bracket resting on the top of the frame. It will accept a single or twin pumps, or the KD Universal Mega filter head and pump/filter combo.

Set of 8 S&S brand new injectors fits 04.5-05 LLY only.

Requires core deposit of $150 per injector which is refundable when cores are received. Cores must be returned within 30 days in the original boxes.

This is the switch that controls operation of the lift pump on late model (92up) 6.5's when the engine is running.

This is a replacement switch specifically designed to be part of the Kennedy lift pump harness and will typically not work in other general applications.

Oil Temperature Gauge - R5659R-O reads 100-280°f

Exclusive programming produced in house by Kennedy Diesel alters Fueling, Timing, Boost, Auto transmission shift firmness, and increased glow plug time for better starts. No need for additional boost controllers. This is an exchange program, please select one of the core options listed below or we will need for you to send your unit in advance.

Available for 1996-up Trucks, Suburbans, Blazer/Tahoe, and Humvees in Performance Tow, and Max Effort calibrations.

"Must specify vehicle, transmission type, VIN, and as much detail as possible so that I may produce the performance level desired. Forget HP claims and hype. The 6.5 does not gain 80HP from a chip. All BS aside, my customers and myself have tested mine against the others and came out on top"- JK

"Fits applications calling for 9005 bulbs. These are not DOT approved but they sure work nice." -JK

"Fits applications calling for 9006 bulbs. These are not DOT approved but they sure work nice." -JK

Phillips Premium series 51w low beams fit all 9006 applications. DOT legal bulbs provide 30% more light on the road! Price listed is for 2 bulbs. These will outlast and outperform others including Sylvania Silverstars.

"Sorry folks, Phillips has discontinued the Rally series high wattage bulbs. If I find some, I'll re-list them. The Philips Premium will outlast and outperform all other DOT legal bulbs including Sylvania Silverstar." - JK

Phillips Premium series 60w high beams fit all 9005 applications. DOT legal bulbs provide 30% more light on the road! Price listed is for 2 bulbs.